Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fold Down the Rear Seats of a Lancia Musa

Model: Lancia Musa MK 1 - Years 2004-2012
Part: Seat

Let's see how to fold down the rear seats of a Lancia Musa. Remove the rear seats to create space in the cabin. First, press the lever located on the backrest of the seat, move the seat forward, and rest it on the seat base. Now pull the metal lever located at the back of the seat base; rotate the seat forward. Perform the same operations on the other rear seats of the car, following the previously mentioned manoeuvres. If you want to remove the seats from the car: press the lever next to the seat and lift it until it detaches from the metal guides (if optional).

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Air Filter from a Lancia Musa
How to Remove the Cabin Air Filter from a Lancia Musa
Lancia Musa (2004-2012 / MK 1) Before you can start, sit in the front passenger seat of your Lancia Musa. Begin by removing the glove compartment by unscrewing the relevant fixing …
Replacing Front Headlamp Bulb in Lancia Musa
Replacing Front Headlamp Bulb in Lancia Musa
Lancia Musa (2004-2012 / MK 1) In this tutorial, you will see the main steps to remove the position bulb from a Lancia Musa. First, open the bonnet and use a screwdriver to remove …
How to Remove the Airbag and Steering Wheel of the Lancia Musa
How to Remove the Airbag and Steering Wheel of the Lancia Musa
Lancia Musa (2004-2012 / MK 1) This guide provides instructions on how to remove and replace the airbag and steering wheel of the Lancia Musa. First, get inside the vehicle and sta…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos