Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the side turn signal bulb in the Lancia Musa?

Model: Lancia Musa MK 1 - Years 2004-2012
Part: Side marker bulb

In this tutorial we can see how to replace the side turn signal bulb in the Lancia Musa, a very simple and quick operation. First of all, make sure that the key is not inserted, so that you can work in complete safety, then grab the indicator light in question, pull it towards the front of the vehicle and unhook it from the bodywork. Next, remove the bulb holder, disconnect the old bulb and connect the replacement, being careful not to touch it directly with bare hands. At this point, all that remains is to reassemble everything following the reverse procedure.

Posted on 20 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlamp Bulb in Lancia Musa
Replacing Front Headlamp Bulb in Lancia Musa
Lancia Musa (2004-2012 / MK 1) In this tutorial, you will see the main steps to remove the position bulb from a Lancia Musa. First, open the bonnet and use a screwdriver to remove …
How to Replace the Dipped Beam Bulb on a Lancia Musa
How to Replace the Dipped Beam Bulb on a Lancia Musa
Lancia Musa (2004-2012 / MK 1) Before you start, open the bonnet of your Lancia Musa. Begin by releasing the clip that secures the electrical connector supplying power to the bulb,…
What is the Reverse Light Fuse in the Lancia Musa?
What is the Reverse Light Fuse in the Lancia Musa?
Lancia Musa (2004-2012 / MK 1) If the reverse light of your Lancia Musa has suddenly stopped working, and the bulb is in good condition, the first thing you can do is check the con…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos