Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform a Service on a Lancia Ypsilon

Model: Lancia Ypsilon Y2, Ypsilon 2, MK 2, 843 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

After running the engine for a few minutes to warm the circulating oil, lift the front of the car with a jack and place a container under the engine bay. Unscrew the drain bolt underneath. While the used oil drains into the container, unscrew the oil filter located in the engine bay, as shown in the video.

Lubricate the O-ring of the new oil filter and screw it in by hand, tightening it slightly with the appropriate filter wrench. Screw the drain bolt back in and fill with new oil from the designated upper compartment of the car.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Lancia Ypsilon (2003-2011 / Y2, Ypsilon 2, MK 2, 843) An extremely simple solution to clear the Service light on a 2004 Lancia Ypsilon. This reminder alerts the owner that regular maintenance is due, as …
Lancia Ypsilon (2003-2011 / Y2, Ypsilon 2, MK 2, 843) How to remove the original car radio on a Lancia Ypsilon? Follow this guide carefully: to remove the radio from your Ypsilon, you do not need plastic…
Lancia Ypsilon (2003-2011 / Y2, Ypsilon 2, MK 2, 843) Learn how to remove the radio housing plastic on the central dashboard of a Lancia Ypsilon. To remove the radio plastics, use metal or plastic levers…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Ypsilon 2003-2011 - What is the position of the Lancia Ypsilon OBD port? Read answer
    • Ypsilon 2003-2011 - Where is the inertia switch of the Lancia Ypsilon 1.2 petrol engine? Read answer

Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris

These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end!

Watch the video!


by ScegliAuto

More videos