Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter in the Lancia Ypsilon 1.3 MultiJet?

Model: Lancia Ypsilon 846, Ypsilon 3, Y3, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Oil filter

See other generations:
Video tutorial

In this video, you can see how to replace the oil filter in the Lancia Ypsilon 1.3 MultiJet; this procedure applies to any car equipped with this engine. First, remove the intake manifold to gain working space, then unscrew the fixing screws of the filter cover using a 10 mm socket and a Torx T30. Once the cover is removed, unscrew the filter with a 27 mm socket.

At this point, extract the old filter and the gasket, and insert the replacements, draining all the engine oil. Finally, perform a complete top-up using 100% synthetic oil.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Lancia Y
How to Change the Engine Oil and Oil Filter on a Lancia Y
Lancia Ypsilon (1996-2003 / 840, Y1, Ypsilon 1, MK 1) Today, I will show you how to change the engine oil and oil filter on your Lancia Ypsilon. It is not a very complex operation; just take some care, a…
How to Change the Engine Oil on a Lancia Ypsilon?
How to Change the Engine Oil on a Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) To change the oil filter on a Lancia Ypsilon, lift the car to access the components in the lower part of the engine bay: here you will locate the dra…
Oil and Filter Replacement on a Lancia Ypsilon
Oil and Filter Replacement on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Replace the oil and filter on a Lancia Ypsilon. This is a straightforward operation if you follow the correct steps. Lift the vehicle using a column …

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos