Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Lancia Ypsilon?

Model: Lancia Ypsilon 846, Ypsilon 3, Y3, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Engine oil

See other generations:
Video tutorial

To change the oil filter on a Lancia Ypsilon, lift the car to access the components in the lower part of the engine bay: here you will locate the drain plug of the oil sump, which can be unscrewed to allow all the oil to flow into a container. Then, you can remove the filter located at the bottom of the engine block: at this point, insert the new filter and continue with the refill.

By opening the bonnet, you will have access to the refill breather where you can add the necessary amount of oil.


Posted on 29 July 2026 by ScegliAuto


Related tutorials

How to Change Oil and Filter on a Lancia Ypsilon
How to Change Oil and Filter on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Follow these steps for the removal and installation of oil and filter on a Lancia Ypsilon: open the car door and pull up the engine compartment relea…
Oil and Filter Replacement on a Lancia Ypsilon
Oil and Filter Replacement on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Replace the oil and filter on a Lancia Ypsilon. This is a straightforward operation if you follow the correct steps. Lift the vehicle using a column …
How to Change the Engine Oil and Oil Filter on a Lancia Y
How to Change the Engine Oil and Oil Filter on a Lancia Y
Lancia Ypsilon (1996-2003 / 840, Y1, Ypsilon 1, MK 1) Today, I will show you how to change the engine oil and oil filter on your Lancia Ypsilon. It is not a very complex operation; just take some care, a…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos