Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Filter Replacement on a Lancia Ypsilon

Model: Lancia Ypsilon Y2, MK 2, 843, Ypsilon 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine oil

See other generations:
Video tutorial

Replace the oil and filter on a Lancia Ypsilon. This is a straightforward operation if you follow the correct steps.

Lift the vehicle using a column lift or jack, unscrew the oil sump bolt with a socket wrench; let the fluid drain into a disposal container and re-screw the sump bolt. Remove the filter next to the oil sump using a chain wrench.

Lower the vehicle and open the bonnet, securing it with the metal rod; top up the engine with new oil and check the level with the dipstick and a cloth.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Lancia Y
How to Change the Engine Oil and Oil Filter on a Lancia Y
Lancia Ypsilon (1996-2003 / 840, Y1, Ypsilon 1, MK 1) Today, I will show you how to change the engine oil and oil filter on your Lancia Ypsilon. It is not a very complex operation; just take some care, a…
How to Change the Engine Oil on a Lancia Ypsilon?
How to Change the Engine Oil on a Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) To change the oil filter on a Lancia Ypsilon, lift the car to access the components in the lower part of the engine bay: here you will locate the dra…
How to Replace the Oil Filter in the Lancia Ypsilon 1.3 MultiJet?
How to Replace the Oil Filter in the Lancia Ypsilon 1.3 MultiJet?
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) In this video, you can see how to replace the oil filter in the Lancia Ypsilon 1.3 MultiJet; this procedure applies to any car equipped with this eng…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos