Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan on a Lancia Musa

Model: Lancia Musa MK 1 - Years 2004-2012
Part: Blower motor

Start by removing the lower dashboard plastic on the passenger side, as shown in the video. Unscrew the 4 Torx screws related to that plastic and pull it to the right to remove it from its position. You will now notice the clips that held it fixed to the rest of the dashboard. Remove the entire compartment related to the air filter as the fan is located beneath it. At this point, simply unscrew the three screws that hold the fan in place and disconnect the connector, insert the new fan, connect it, and screw it in. Refit the air filter compartment and close the initially removed plastic.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Air Filter from a Lancia Musa
How to Remove the Cabin Air Filter from a Lancia Musa
Lancia Musa (2004-2012 / MK 1) Before you can start, sit in the front passenger seat of your Lancia Musa. Begin by removing the glove compartment by unscrewing the relevant fixing …
Replacement of the cabin air filter of the Lancia Musa
Replacement of the cabin air filter of the Lancia Musa
Lancia Musa (2004-2012 / MK 1) These short and simple instructions will allow us to disassemble and replace the cabin air filter of the Lancia Musa. First, we open the front passen…
What is the Reverse Light Fuse in the Lancia Musa?
What is the Reverse Light Fuse in the Lancia Musa?
Lancia Musa (2004-2012 / MK 1) If the reverse light of your Lancia Musa has suddenly stopped working, and the bulb is in good condition, the first thing you can do is check the con…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos