Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in a Lancia Ypsilon

Model: Lancia Ypsilon 846, Ypsilon 3, Y3, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Air filter

See other generations:
Video tutorial

To replace the air conditioning filter in the Lancia Ypsilon, first remove the passenger side mat for easier access. Then, using a Torx key size 25, remove the lower panel of the centre tunnel on the passenger side.

The filter is located right underneath, but it is not clipped in; it is held in place by two screws of size 5.5, which you will need to unscrew and remove. You will also need to disconnect the wiring connector and a couple of wires that may get in the way. Remove the filter, clean the inside of the compartment, and fit the new one, ensuring the airflow direction is correct.

However, there is another wire to disconnect before refitting the new filter! Reattach its cover with the screws. Now, reposition all the wires you moved to carry out the job. Refit the partition and then the mat. The job is complete.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Filter on a Lancia Ypsilon
Replacing the Cabin Filter on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) In this video, you will learn how to replace the cabin filter on a Lancia Ypsilon. The filter is located directly behind the plastic panel on the lef…
How to Replace the Cabin Air Filter on a Lancia Ypsilon
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) How to replace the cabin air filter on a Lancia Ypsilon? The cabin filter is located at the bottom left of the glove compartment. Use a plastic lever…
How to Replace the Cabin Filter on a Lancia Ypsilon
How to Replace the Cabin Filter on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) How do you replace the cabin filter on a Lancia Ypsilon? Here’s how to carry out the replacement: using a screwdriver or a cordless drill, remove the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos