Do it yourself
| ||||
|
Lancia Ypsilon - Video tutorial
Model: Lancia Ypsilon
Y3, Ypsilon 3, 846, MK 3
- Years 2011-2023 In this video you can see how it is possible to change the time of day on a Lancia Ypsilon by following small steps: first you have to get into your car, press the SET button located under the instrument panel; then move with the arrow keys up and down until you reach the setting for the time (ADJUST TIME), THEN YOU HAVE TO PRESS THE SET BUTTON and the SET button again. At this point with the arrow keys (up and down), move up or down to adjust the time. Start by setting the hour, then press SET to set the minutes and then press the SET button again. At this point you have confirmed the time on your vehicle.
Posted on 21 May 2024 by ScegliAuto
How to change the time on a Lancia Ypsilon
Lancia Ypsilon (2011-2023 / Y3, Ypsilon 3, 846, MK 3) Before being able to start, we will have to go and sit in the driver's seat of our Lancia Ypsilon. So let's start by activating the on-board computer
How to disassemble the car radio of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) Before we can begin, we will have to go and sit in the driver's seat of our Lancia Ypsilon. So let's start by inserting the special extractor keys in
How to replace engine oil and oil filter on a Lancia Y
Lancia Ypsilon (1996-2003 / MK 1, Y1, Ypsilon 1, 840) Today I will show you how to change the oil and the engine filter on our Lancia Ypsilon, it is not a very complex operation, you just need to be care Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |