Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Defender
    4. : How to change Land Rover Defender dashboard instrument cluster bulbs

Land Rover Defender - Video tutorial

Model: Land Rover Defender MK 5 - Years 1983-1990
Part: Dashboard light
Operation: How to change Land Rover Defender dashboard instrument cluster bulbs

Let's find out in this guide how to disassemble and replace the bulbs in the dashboard instrument panel of the Land Rover Defender, following these simple steps. First of all, we get on board the car and begin to disassemble our instrument panel; to do this we unscrew the fixing screws that we find on the sides, as shown in the video. At this point we remove the lamp holders together with the bulbs, replacing the bulb lights with the new ones; insert them in the correct direction and reassemble the instrument panel on the dashboard, connecting the electric cables, following the video tutorial to the end!


Posted on 13 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos