Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Windshield Wiper Motor on a Land Rover Defender

Model: Land Rover Defender MK 5 - Years: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990

See other generations:
Video tutorial

In this guide, follow the main instructions to remove and replace the windshield wiper motor on a Land Rover Defender. First, move to the front of your vehicle and start by removing the wiper blades.

Next, loosen the nut on the wiper pivot, as shown in the video. At this point, remove the upper part of the dashboard to access the mechanism and the wiper motor.

Disconnect the electrical connector and remove the screws to take it out and replace it, following the video to the end!


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How to Remove the Windshield from a Land Rover Defender
How to Remove the Windshield from a Land Rover Defender
Land Rover Defender (1990-2016 / MK 6) Using a common utility knife, start by making a cut inside the side protective sheath of the windshield. Next, remove the entire sheath by simply pul…
How to Replace the Starter Motor on a Land Rover Defender
How to Replace the Starter Motor on a Land Rover Defender
Land Rover Defender (1990-2016 / MK 6) Before you begin, open the hood of your Land Rover Defender. Start by disconnecting the battery terminals by removing the securing bolts. Next, remov…
How to Replace the Windshield Wipers on a Land Rover Defender
How to Replace the Windshield Wipers on a Land Rover Defender
Land Rover Defender (1983-1990 / MK 5) This simple and quick task allows you to save time and money by avoiding taking your vehicle to a shop for the job. Just follow this brief guide to u…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos