Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. LEVC
    3. :
  3. Levc Tx
    4. : Checks and maintenance

LEVC Tx - Checks and maintenance

LEVC Tx (2017-2024 / MK 1)
Guide to using the Levc Tx
In this short and simple guide we will see a guide aimed at the Levc Tx operator, illustrating the main features of this electric vehicle. First of all, let's …read all…
Posted on 8 May 2024 by ScegliAuto
LEVC Tx (2017-2024 / MK 1)
How do you set up the preconditioning of the Levc TX?
In order to set the preconditioning of the Levc TX while it is connected to a charging column, it will be necessary to use the display located in the central …read all…
Posted on 25 April 2024 by ScegliAuto
LEVC Tx (2017-2024 / MK 1)
How do you open the Levc TX's disabled transport platform?
In order to open the platform for the transport of the disabled on the Levc TX, you need to open the rear door of the car, inserting the key in the special …read all…
Posted on 25 April 2024 by ScegliAuto
LEVC Tx (2017-2024 / MK 1)
Levc TX Wheelchair Ramp User Guide
In this video tutorial we will see the guide that will allow us to use the wheelchair ramp of the Lavc TX, following the instructions below. First we open the …read all…
Posted on 25 April 2024 by ScegliAuto
Checks and maintenance (4) Grille (1) Engine oil (1) Instrument cluster (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos