Do it yourself
| ||||
|
LEVC Tx - Video tutorial
Model: LEVC Tx
MK 1
- Years 2017-2024 In this video tutorial we will see the guide that will allow us to use the wheelchair ramp of the Lavc TX, following the instructions below. First we open the rear door and start turning the key to unlock our access ramp; then we open the ramp until it touches the ground, bearing in mind that it bears a maximum load of 250 kg. In this way it is possible to load the wheelchair into our electric car, then wearing all the seat belts, following the video tutorial until the end!
Posted on 25 April 2024 by ScegliAuto
Other guides that may interest you
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |