Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Wheelchair Ramp of the Levc TX?

Model: LEVC Tx MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Checks and maintenance

Video tutorial

To open the wheelchair ramp of the Levc TX, open the rear door of the vehicle, inserting the key into the designated lock on the threshold. This way, you can fully extract the ramp from its housing and place it on the floor to assist a disabled passenger in boarding.

The ramp can also be used as a step: to do this, pull it out and grasp the knob at the front, raising the step which should then be rotated 180°. This way, you can push the ramp back in, utilizing the step just extracted.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Guide to Using the Wheelchair Ramp of the Levc TX
Guide to Using the Wheelchair Ramp of the Levc TX
LEVC Tx (2017-2024 / MK 1) In this tutorial video, we will see the guide that will allow us to use the wheelchair ramp of the Levc TX, following the instructions below. First, …
Guide to Using the Control Panel of the Levc TX
Guide to Using the Control Panel of the Levc TX
LEVC Tx (2017-2024 / MK 1) In this guide, we will look at the functions and how to use the control panel of the Levc TX, following the instructions provided below. First, get i…
How to Install the Partition Screen Seal Kit on LEVC TX eCity
How to Install the Partition Screen Seal Kit on LEVC TX eCity
LEVC Tx (2017-2024 / MK 1) The iconic LEVC English Taxi offers a kit to seal the partition screen. The kit is free, and the LEVC dealer will install it at no charge, but our Yo…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos