Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set Up Preconditioning for the Levc TX?

Model: LEVC Tx MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Checks and maintenance

Video tutorial

To set up preconditioning for the Levc TX while it is connected to a charging station, use the display located in the center of the instrument panel. Through the menu options, you can set the desired temperature and the time you want the fan to run. Once the car is fully charged, disconnect the cable from the charging station to enter the cabin.

You will notice that the fan has adjusted the internal temperature.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Install the Partition Screen Seal Kit on LEVC TX eCity
How to Install the Partition Screen Seal Kit on LEVC TX eCity
LEVC Tx (2017-2024 / MK 1) The iconic LEVC English Taxi offers a kit to seal the partition screen. The kit is free, and the LEVC dealer will install it at no charge, but our Yo…
How to Replace the Front Grille of the Levc TX?
How to Replace the Front Grille of the Levc TX?
LEVC Tx (2017-2024 / MK 1) To replace the front grille of the Levc TX, lift the hood to access the screws securing the chrome trim at the top of the grille. Once removed, unscr…
Guide to Using the Control Panel of the Levc TX
Guide to Using the Control Panel of the Levc TX
LEVC Tx (2017-2024 / MK 1) In this guide, we will look at the functions and how to use the control panel of the Levc TX, following the instructions provided below. First, get i…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos