Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. LEVC
    3. :
  3. Vn5
    4. : Tips for driving an electric Levc Vn5

LEVC Vn5 - Video tutorial

Model: LEVC Vn5 MK 1 - Years 2020-2024
Operation: Tips for driving an electric Levc Vn5

Compared to conventional cars, driving an electric car is a completely different experience, to which you have to adapt gradually. In these cases there is a tendency to favor a more ecological gait, focusing on energy saving and the optimization of the efficiency of the electric motor. In modern electric cars the torque is immediately available, for this reason it is not the presence of the gearbox or the clutch, as the same ratios can be used for starting and traveling on the motorway at high speeds. In general, therefore, with a rechargeable battery car it is sufficient to use the accelerator and brake pedals. To optimize performance, the zero-emission machines are equipped with dedicated energy recovery systems, including regenerative braking. This technology makes it possible to use part of the energy generated during braking and decelerations to increase efficiency and increase the range of the electric car. Having the whole couple immediately available, it is necessary to pay attention to the start, otherwise the car could snap considerably. To avoid this, you need to become familiar with the immediate response of the electric motor, so it is advisable to drive carefully, avoiding sudden jerks of the car and waste of energy.


Posted on 15 May 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos