Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lexus
    3. :
  3. Lexus Is
    4. : Light bulb

Lexus IS - Light bulb

Lexus IS (2005-2013 / MK 2)
LED interior lighting installation
Replacing the interior lights with those of the LED type will give the car a decidedly more modern and captivating appearance as well as improve visibility …read all…
Posted on 29 August 2023 by ScegliAuto
Lexus IS (2005-2013 / MK 2)
Installation of LED strip in the luggage rack
The installation of a LED strip (adhesive strip) inside the luggage compartment will certainly improve visibility: it is basically a matter of identifying the …read all…
Posted on 28 August 2023 by ScegliAuto
Car stereo (4) Anti roll bar (1) Battery (3) Bushings (2) Arm (2) Spark plugs (1) Bodywork (3) Wheel rim (2) Key (8) Timing belt (1) V-belt (1) -board computer (4) Checks and maintenance (6) Dashboard (2) Brake discs (3) Air filter (5) Cabin air filter (8) Diesel filter (1) Oil filter (1) Grille (1) Accessory Kit (12) Light bulb (2) Headlight bulb (1) Rear light bulb (1) Interior lights ceiling light bulb (1) Handle (1) Engine (2) Engine oil (1) Brake pads (4) Tires (4) Pump (2) Door (1) Instrument cluster (3) Wheel (1) Fuse box (4) Seat (1) Manufacturer's coat of arms (1) Thermostat (2) EGR valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos