Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lexus
    3. :
  3. Lexus Is
    4. : Battery

Lexus IS - Battery

Lexus IS (2013-2023 / MK 3)
How to recharge the starting battery of the Lexus IS300H.
In this video, we see how to recharge the starter battery of a Lexus IS300 H, which is located in the trunk and not in the engine compartment. We will need a …read all…
Posted on 17 January 2024 by ScegliAuto
Lexus IS (2005-2013 / MK 2)
How to change the Lexus IS remote control battery
Let's see today in this short guide how to remove and replace the remote control battery of the Lexus IS key, following the instructions below. First of all, …read all…
Posted on 1 June 2022 by ScegliAuto
Lexus IS (2005-2013 / MK 2)
Replace the remote control battery on the Lexus IS 250 - IS 300 H
In this video tutorial we will see the steps that will allow us to remove and replace the key remote control battery on the Lexus IS 250, but also on the 300 …read all…
Posted on 5 March 2024 by ScegliAuto
Car stereo (4) Anti roll bar (1) Battery (3) Bushings (2) Arm (2) Spark plugs (1) Bodywork (3) Wheel rim (2) Key (8) Timing belt (1) V-belt (1) -board computer (4) Checks and maintenance (6) Dashboard (2) Brake discs (3) Air filter (5) Cabin air filter (8) Diesel filter (1) Oil filter (1) Grille (1) Accessory Kit (12) Light bulb (2) Headlight bulb (1) Rear light bulb (1) Interior lights ceiling light bulb (1) Handle (1) Engine (2) Engine oil (1) Brake pads (4) Tires (4) Pump (2) Door (1) Instrument cluster (3) Wheel (1) Fuse box (4) Seat (1) Manufacturer's coat of arms (1) Thermostat (2) EGR valve (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos