Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lexus
    3. :
  3. Lexus Is
    4. : Onboard computer

Lexus IS - Onboard computer

Onboard Computer Lexus IS (2005-2013 / mk 2)

Lexus IS (2005-2013 / MK 2)
Instructions for Changing the Screen Image
To replace the background image of the onboard display, first select the desired image and upload it to a USB drive, ensuring that the storage folders are …Read all…
Posted on 26 February 2026 by ScegliAuto
Lexus IS (2005-2013 / MK 2)
Deactivating Seatbelt Warning Buzzer
You can deactivate the buzzer that reminds you to wear your seatbelt: when you perform this deactivation, the warning light continues to flash on the …Read all…
Posted on 23 February 2026 by ScegliAuto
Antenna (1) Car stereo (5) Anti-roll bar (1) Battery (1) Bushings (2) Control arm (2) Spark plugs (1) Body (3) Wheel rim (2) Key (12) Timing belt (2) V-belt (1) Onboard computer (2) Checks and maintenance (9) Dashboard (2) Brake rotors (3) Air filter (5) Cabin air filter (8) Diesel fuel filter (1) Oil filter (1) Grille (2) Accessory kit (12) Light bulb (2) Headlight bulb (2) Tail light bulb (1) Interior dome light bulb (1) Handle (1) Engine (2) Engine oil (1) Brake pads (4) Tires (1) Pump (2) Car door (1) Instrument cluster (1) Wheel (1) Fuse box (5) Seat (1) Warning light – error code (3) (12) Tire pressure warning light (1) Service warning light (5) Manufacturer emblem (1) Thermostat (2) EGR valve (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos