Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine oil change on Lexus LS

Model: Lexus LS MK 4 - Years 2007-2017
Part: Engine oil

Get in your car and close the door. Without pressing the clutch pedal, and therefore without starting the car, press the ignition button twice. Then press the button again, turning off the ignition and, with the ignition and the engine off, press and hold the button under the speedometer. While continuing to hold the aforementioned button, double-click the power button. When the oil change light has reset, release the button under the speedometer. Remember not to use this procedure instead of ordinary maintenance, but to carry it out only after having carried out the service.

Posted on 28 March 2021 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil service in Lexus LS 500?
How to reset the oil service in Lexus LS 500?
Lexus LS (2007-2017 / MK 4) In this tutorial we can see how to reset the oil service in the Lexus LS 500. Before carrying out this simple and quick operation, let's make sure th…
How do you replace the cabin filter in a Lexus LS?
How do you replace the cabin filter in a Lexus LS?
Lexus LS (2007-2017 / MK 4) It will be possible to replace the cabin filter of the Lexus LS by opening the glove compartment located on the passenger side. Once it is opened, yo…
How to open the locked fuel door on the Lexus LS 400?
How to open the locked fuel door on the Lexus LS 400?
Lexus LS (2007-2017 / MK 4) In the Lexus LS 400, it is possible for the fuel door to get stuck, for example due to a malfunction in the control button or lock actuator. In these…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos