Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Car Radio Removal Instructions

Model: Lexus RX Al10, MK 3 - Years 2008-2015
Part: Car stereo

To remove the original car radio, you need to take out some elements of the centre console. First, move the gear lever back to create more working space; unclip the trim around the gear lever (lever it off along the edges using a plastic trim tool) and the panel just below the centre console, where the cigarette lighter socket is located. Next, unscrew the screws under the edge of the centre console; then pull the car radio outwards to unclip and extract it from its housing, disconnecting the rear connectors.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Ford Ka (1996-2008 / MK 1) To remove the original car radio, you need to have the appropriate extraction keys: these are high-strength steel wires shaped like a "U" that must b…
Removing the Original Car Radio
Removing the Original Car Radio
Hyundai Santa Fe (2006-2012 / MK 2) Remove the screws securing the knee pad on the driver's side to slightly move it away from its position (this is necessary to allow the removal of th…
Removing the Original Car Radio
Removing the Original Car Radio
Volvo S70 (1996-2000 / MK 1) No special tools are required to remove the original car radio. On the side edge of the stereo, at the bottom, there are two extraction elements that…

How to Remove the Driver's Side Airbag (Steering Wheel) on a BMW 3 Series

How to remove the driver's side airbag (steering wheel) on a BMW 3 Series? This operation is very simple if you follow the steps. Let's see in this guide how to proceed: insert a medium-length screwdriver into the rear slots on the steering wheel and turn until you release the clips that hold the airbag. Once the airbag is disconnected, disconnect the power connectors and remove it from the steering wheel. For reinstalling the airbag: connect the power connector, then press it onto the steering wheel until the locking clips snap into place inside the steering wheel.

Watch the video!


by ScegliAuto

More videos