Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace a Lexus Is rear light bulb

Model: Lexus IS MK 2 - Years 2005-2013
Part: Tail light bulb

To proceed with the replacement of a rear light unit bulb, it is necessary to carry out the following operations: open the rear door, identify the rear light in which to replace the light bulb, identify the two screws on the internal profile that will need to be unscrewed to remove the light unit , at this point, pull the headlight towards you and extract it, then locate the bulb to be replaced and unscrew the bulb by turning it half a turn. Then unclip the bulb and replace it (check the specifications and type of bulb). Finally, screw the bulb back on, reposition the optical unit and refit the screws fixing the headlight to the bodywork.

Posted on 15 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Lexus IS 250 key.
How to replace the battery of the Lexus IS 250 key.
Lexus IS (2013-2024 / MK 3) To correctly replace the button battery located inside the smart key of your Lexus IS 250, it only takes a few minutes. Thanks to the following guide…
Replace the remote control battery on the Lexus IS 250 - IS 300 H
Replace the remote control battery on the Lexus IS 250 - IS 300 H
Lexus IS (2005-2013 / MK 2) In this video tutorial we will see the steps that will allow us to remove and replace the key remote control battery on the Lexus IS 250, but also on…
How to replace the battery of the Lexus IS250 key
How to replace the battery of the Lexus IS250 key
Lexus IS (2005-2013 / MK 2) The procedure required for replacing the battery inside the key of your Lexus IS250 is really very simple and immediate. In this new guide of ours, w…

Other guides you may be interested in

How to Remove the Front Shock Absorber on a Peugeot 406

How to remove the front shock absorber on a Peugeot 406? The first step is to lift the bonnet and secure it with the prop rod. Use a socket wrench to unscrew the shock absorber mounting bolts (engine bay), lift the car on a column lift and remove the front wheel. Unscrew the shock absorber mounting bolts at the wheel hub (detach the brake line clips with a screwdriver). Unscrew the bolts on the side, then remove the shock absorber from its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Fit the new shock absorber to the car, working in reverse order.

Watch the video!


by ScegliAuto

More videos