Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure warning light on the Lexus IS

Model: Lexus IS MK 2 - Years 2005-2013
Part:

Below we will see the instructions that will allow us to reset the tire pressure warning of the Lexus IS; before performing the TPMS sensor reset, it is necessary that all four tires are at the correct pressure. So, let's get on board the car and start turning on the instrument panel; then we press and hold the TPMS reset button located at the bottom on the driver's side, next to the steering wheel, until the tire pressure warning reset is completed on the instrument panel display. Finally, turn off the instrument panel and start the engine!

Posted on 9 October 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Lexus IS (2013-2024 / MK 3) In this guide, you will learn how to reset the tyre pressure light on the Lexus IS 300 2.5. First, ensure that you have adjusted the tyre pressures t…
Lexus IS (2005-2013 / MK 2) Today we will see the steps that will allow us to reset the tire pressure warning on the Lexus IS; before performing the TPMS sensor reset, it is nec…
Lexus IS (2013-2024 / MK 3) If you own a Lexus IS and want to learn how to correctly reset the tire pressure warning light manually, all you have to do is read the following pro…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos