Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Sensors on a Lexus IS300?

Model: Lexus IS MK 2 - Years 2005-2013
Part:

The instrument panel visible in the video above belongs to a Lexus IS300, and now we will explain how to reset the tyre anomaly light. This light activates when the tyre pressure does not meet the manufacturer's specified values, so we need to ensure that the value is correct, then turn on the instrument panel, check the values mentioned in the onboard computer, and if everything is okay, press and hold the Set button located on the dashboard, driver's side, until the anomaly light turns off. Operation completed.

Posted on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to perform the learning of TPMS sensors on the Lexus IS
How to perform the learning of TPMS sensors on the Lexus IS
Lexus IS (2013-2024 / MK 3) Today we will see the steps that will allow us to carry out the learning of the tire pressure sensors of the Lexus IS, thus resetting the TPMS warnin…
How to Reset the Tyre Light on a Lexus IS 250?
How to Reset the Tyre Light on a Lexus IS 250?
Lexus IS (2005-2013 / MK 2) In this tutorial, we will see how to reset the tyre light on a Lexus IS 250, a very simple and quick operation to perform only after restoring the co…
How to Reset the Tyre Pressure Light on a Lexus IS 300 2.5
How to Reset the Tyre Pressure Light on a Lexus IS 300 2.5
Lexus IS (2013-2024 / MK 3) In this guide, you will learn how to reset the tyre pressure light on the Lexus IS 300 2.5. First, ensure that you have adjusted the tyre pressures t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos