Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning on the Lexus IS

Model: Lexus IS MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

Today we will see the steps that will allow us to reset the tire pressure warning on the Lexus IS; before performing the TPMS sensor reset, it is necessary for all four tires to be at the correct pressure. So we get on board the car and start the instrument panel; we go to the tire pressure option and hold down the "ok" button found on the left side of the steering wheel (on the dashboard), until the tire pressure warning on the display is reset, as shown in the video.

Finally, we turn off the panel and start the engine!


Posted on 2 July 2025 by ScegliAuto


Related tutorials

How to reset the tire pressure warning light on the Lexus IS
Lexus IS (2005-2013 / MK 2) Below we will see the instructions that will allow us to reset the tire pressure warning of the Lexus IS; before performing the TPMS sensor reset, it…
How to perform the learning of TPMS sensors on the Lexus IS
How to perform the learning of TPMS sensors on the Lexus IS
Lexus IS (2013-2024 / MK 3) Today we will see the steps that will allow us to carry out the learning of the tire pressure sensors of the Lexus IS, thus resetting the TPMS warnin…
How to reset the tire pressure light on the Lexus IS 300?
How to reset the tire pressure light on the Lexus IS 300?
Lexus IS (2005-2013 / MK 2) In this tutorial we can see how to reset the tire pressure light in the Lexus IS 300, an extremely simple and quick operation, to be carried out only…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos