Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Interior Trim Inserts

Model: Lexus IS MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Dashboard

See other generations:
This video is currently unavailable

The inserts covering the windscreen pillars, scuff plates, the switch panel on the door, the air vents on the centre console, and the trim at the base of the gear lever are all secured with clips. To remove these elements, leverage along the edges to disengage them.

Exercise maximum caution to avoid damaging the edges; it is recommended to use plastic levers or a small flat screwdriver, possibly wrapping the tip with insulating tape.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Application of Carbon Fibre Effect Film
Lexus IS (2005-2013 / MK 2) To give the interior of your car a sporty and appealing look, consider covering the trims and inserts with carbon fibre effect film. This operation r…
GPS Module Installation Instructions
Lexus IS (2013-2024 / MK 3) Installing the GPS module to integrate the satellite navigation system with the car radio is not particularly complex but mainly requires time and pa…
Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Lexus IS (2005-2013 / MK 2) To remove the original car radio, first move the gear lever all the way back to facilitate the extraction process. Start by removing the aluminium tr…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos