Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Central Dashboard Console

Model: Lexus IS MK 1 - Years 1998-2005
Part: Dashboard

First, shift the gear lever backwards to facilitate the removal and extraction of the console. Unclip and pull out the switch panel located just below the monitor, pulling it forward, and disconnect the relevant connectors. Similarly, unclip the glove compartment with the air vents located above the radio. At this point, unscrew the four fixing screws of the central console for the climate control and monitor (both upper and lower screws) to extract it from its housing, subsequently disconnecting the connectors attached to it.

Updated on 4 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Lexus IS (2005-2013 / MK 2) To remove the original car radio, first move the gear lever all the way back to facilitate the extraction process. Start by removing the aluminium tr…
How to deactivate the traction control in the Lexus IS 350?
How to deactivate the traction control in the Lexus IS 350?
Lexus IS (2013-2024 / MK 3) This tutorial shows how to deactivate the traction control in the Lexus IS 350, a very simple and quick operation to perform only when necessary and …
How to remove the phone holder from the dashboard of the Lexus IS
How to remove the phone holder from the dashboard of the Lexus IS
Lexus IS (2013-2024 / MK 3) The following video tutorial will show us the steps to remove the 3M adhesive from the dashboard of the Lexus IS. The 3M adhesive is used to stick th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos