Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light in the Lexus IS 250?

Model: Lexus IS MK 2 - Years 2005-2013
Part:

In this tutorial we can see how to reset the tire pressure light in the Lexus IS 250, an extremely simple and quick operation, to be done only after restoring the correct pressure of each tire following the instructions in the manual. First of all, go inside the cabin, then insert the key and turn on the dashboard. Next, locate the "SET" button located in the lower area of the dashboard, on the driver's side, and hold it down for the necessary time for the light to disappear from the dashboard. To complete the procedure, simply restart the vehicle.

Posted on 21 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Lexus IS 300?
How to reset the tire pressure light in the Lexus IS 300?
Lexus IS (2013-2024 / MK 3) In this tutorial we can see how to reset the tire pressure light in the Lexus IS 300, an extremely simple and quick operation, to be performed only o…
How to Reset the Tyre Light on a Lexus IS 250?
How to Reset the Tyre Light on a Lexus IS 250?
Lexus IS (2005-2013 / MK 2) In this tutorial, we will see how to reset the tyre light on a Lexus IS 250, a very simple and quick operation to perform only after restoring the co…
How to Replace the Key Battery for the Lexus IS 250
How to Replace the Key Battery for the Lexus IS 250
Lexus IS (2013-2024 / MK 3) To correctly replace the button battery located inside the smart key of your Lexus IS 250, it only takes a few minutes. With the following guide, you…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos