Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor on the Lexus IS 3

Model: Lexus IS MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tire pressure warning light

See other generations:
Video tutorial

If you own a Lexus IS and want to learn how to correctly reset the tire pressure warning light manually, all you have to do is read the following procedure and follow the steps described. First, get into the driver's seat inside the car and then turn on the ignition by pressing the appropriate button located to the right of the steering wheel.

Once you have done that, locate the "Set" button located below the steering wheel and hold it down until the tire pressure warning light disappears from the instrument panel. Finally, turn off the ignition and the procedure is successfully completed.


Posted on 27 April 2025 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Lexus IS 300 2.5
How to Reset the Tyre Pressure Light on a Lexus IS 300 2.5
Lexus IS (2013-2024 / MK 3) In this guide, you will learn how to reset the tyre pressure light on the Lexus IS 300 2.5. First, ensure that you have adjusted the tyre pressures t…
How to reset the tire pressure light on the Lexus IS 300?
How to reset the tire pressure light on the Lexus IS 300?
Lexus IS (2005-2013 / MK 2) In this tutorial we can see how to reset the tire pressure light in the Lexus IS 300, an extremely simple and quick operation, to be carried out only…
How to reset the tire pressure warning light on the Lexus IS
Lexus IS (2005-2013 / MK 2) Below we will see the instructions that will allow us to reset the tire pressure warning of the Lexus IS; before performing the TPMS sensor reset, it…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos