Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Lexus IS250 key

Model: Lexus IS MK 2 - Years 2005-2013
Part: Key

The procedure required for replacing the battery inside the key of your Lexus IS250 is really very simple and immediate. In this new guide of ours, we will discover together the various steps to follow to complete the replacement correctly. First of all, purchase a new CR2032 battery, then locate the "Push" button on the key and hold it down in order to remove the emergency key. At this point, remove the back cover and replace the old battery with the new one. Finally, reassemble the cover and you're done.

Posted on 8 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb of the Lexus IS250
How to Replace the Front Headlamp Bulb of the Lexus IS250
Lexus IS (2005-2013 / MK 2) In this new mini guide dedicated to your Lexus IS250 second series (2011), we will discover how to replace the front headlamp bulb independently, wit…
How to Reset the Tyre Warning Light on the Lexus IS250?
How to Reset the Tyre Warning Light on the Lexus IS250?
Lexus IS (2013-2024 / MK 3) In this tutorial, you will see how to reset the tyre warning light on the Lexus IS250, a very simple and quick operation, to be performed only after …
How to Replace the Air Filter on a 2007 Lexus IS250
How to Replace the Air Filter on a 2007 Lexus IS250
Lexus IS (2005-2013 / MK 2) If you are wondering how to replace the air filter in your Lexus IS 250 Mk2 (2007), read this guide carefully and follow the described steps. First, …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos