Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Operation of Cabin Lights

Model: Lexus IS MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Interior dome light bulb

See other generations:
This video is currently unavailable

The cabin lights turn on when a door is opened and turn off when it is closed; if the lights do not turn on when the door is opened, perform the following checks: first, ensure that the bulbs are not blown (to inspect the bulbs, detach the ceiling light by inserting a small screwdriver into the appropriate slots); check the integrity of the corresponding fuses (by consulting the user manual, you can find the correspondence between the cabin light bulbs fuse and its position) and finally check the oxidation state of the door button itself.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Installation of LED Interior Lights
Installation of LED Interior Lights
Lexus IS (2005-2013 / MK 2) Replacing the interior lights with LED types will give the vehicle a much more modern and appealing look, as well as improve visibility inside the ca…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Lexus IS (1998-2005 / MK 1) The cabin air filter is located on the passenger side, inside the glove compartment: to replace it, simply open the door and remove the cap at the bo…
Replacement of the Cabin Air Filter
Lexus IS (2013-2024 / MK 3) The cabin air filter is located on the passenger side, inside the glove compartment: therefore, open the glove compartment door and locate the cabin …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos