Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump in the Lexus GS 300?

Model: Lexus GS S160 - Years 1997-2005
Part: Fuel pump

In this tutorial, we can see how to replace the fuel pump in the Lexus GS 300, a very simple and quick operation. First of all, make sure that the key is not inserted, then open the hood and disconnect the battery, in order to work safely. Next, lift the rear seat cushion, open the cap on the right side by unscrewing the respective bolts, and continue by disconnecting both the power connector and the fuel pipe. At this point, we can unscrew the bolts along the perimeter of the pump with an 8mm wrench, remove it from the tank, and install the replacement.

Posted on 14 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Lexus GS 300?
How to reset the tire pressure light in the Lexus GS 300?
Lexus GS (2005-2011 / S190) In this tutorial we can see how to reset the tire pressure light in the Lexus GS 300, an extremely simple and quick operation, to be done only once t…
How to replace the cabin air filter of the 2013 Lexus GS350.
How to replace the cabin air filter of the 2013 Lexus GS350.
Lexus GS (2011-2020 / L10) The replacement of the cabin air filter in your 2013 Lexus GS350 is very simple and only takes a few minutes to complete correctly and without any is…
Replacement of the Lexus GS key remote battery
Replacement of the Lexus GS key remote battery
Lexus GS (2005-2011 / S190) The following steps will show us how to disassemble and replace the battery of the Lexus GS key remote. First, we take our remote and start by removi…

Other guides you may be interested in

How to Remove the Spark Plugs on a Subaru Forester

In this video, learn how to remove the spark plugs on a Subaru Forester. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the soundproofing panel covering the cylinder head, the air filter kit (if necessary), then disconnect the coils by hand, unscrew the spark plugs with your socket wrench, and pull them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket wrench into the cylinder head, tighten them properly, secure the ignition coils, refit the previously removed panel and the air filter kit. Close the engine bonnet.

Watch the video!


by ScegliAuto

More videos