Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump on the Audi A5

Model: Audi A5 8T8, 8T3, 8T, 8F - Years 2007-2016
Part: Fuel pump

This guide provides the main instructions for removing and replacing the fuel pump on the Audi A5. The low-pressure fuel pump is located under the rear seat; therefore, remove the seat to access it, then remove the plastic cover. At this point, disconnect the electrical wiring of the pump, also disconnecting the fuel lines; now unscrew the pump collar to remove it from the tank, then replace the fuel pump with the new original one. Make the connections correctly and finally reassemble the rear seat!

Posted on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Fuel Filler Lock on an Audi A4
Removing the Fuel Filler Lock on an Audi A4
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Don't know how to remove the fuel filler lock on an Audi A5? Follow these simple steps. Open the fuel filler flap, unscrew the filler cap, and use a …
Is it Possible to Change the Water Pump on an Audi A5 Without Recharging the Air Conditioning Gas?
Is it Possible to Change the Water Pump on an Audi A5 Without Recharging the Air Conditioning Gas?
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) This video shows the replacement of the water pump on this Audi A5, featuring an interesting method of moving the air conditioning radiators to one s…
How to open the fuel door of the Audi A5?
How to open the fuel door of the Audi A5?
Audi A5 (2018-2025 / 8W6) Previous Audi models did not have electronic protection inside the fuel cap, but in the latest generation models this has been introduced, which mean…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos