Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A5
    4. : How do you reset the Audi A5 AdBlue warning light?

Audi A5 - Video tutorial

Model: Audi A5 8F, 8T3, 8T8, 8T - Years 2007-2016
Part: Checks and maintenance
Operation: How do you reset the Audi A5 AdBlue warning light?

To reset the Audi A5's AdBlue warning light, it is sufficient to top up the additional fluid, as the warning light often lights up when the fluid level in the special tank is low. To be able to top up, you need to open the fuel flap on the right side of the car: next to the fuel tank cap there will be the AdBlue tank cap. To top up it will be necessary to insert the additional liquid until the tank is completely filled; in this way it will be possible to see that the warning light will switch off automatically.


Posted on 12 October 2022 by ScegliAuto

    Frequently Asked Questions

    • A5 2007-2016 - What are the problems with the Audi A5 2.0 TDI? Read Answer
    • A5 2018-2025 - How much does the Audi A5 service cost? Read Answer
    • A5 2007-2016 - How much engine oil does it take for the Audi A5 3.0? Read Answer
    • A5 2007-2016 - What are the lights of the Audi A5? Read Answer
    • A5 2007-2016 - How much does it cost to have the Audi A5 serviced? Read Answer
    • A5 2007-2016 - What is the cost of the Audi A5 service? Read Answer
    • A5 2007-2016 - What are the maintenance costs of an Audi A5? Read Answer
    • A5 2007-2016 - When and how much does the service cost on Audi A5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos