Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will go through the main steps to carry out the routine maintenance service by changing the engine oil and oil filter on the Linhai Promax 500. First, remove both front wheel arches, then take off the footrests by unscrewing all the fixing screws; next, unscrew the drain bolt located under the engine, allowing the oil to drain into a container, as shown in the video. At this point, unscrew the oil filter cartridge and replace it with a new one, tightening gently; finally, pour in the new oil!

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Differential Oil on a Linhai Promax 500
How to Change the Differential Oil on a Linhai Promax 500
Promax 500 In today's tutorial, we will see how to replace the transmission oil on the Linhai Promax 500 in simple and quick steps. First, lift the vehicle and …
How to Dismantle the Engine of the Linhai Promax 500?
How to Dismantle the Engine of the Linhai Promax 500?
Promax 500 To dismantle the engine of the Linhai Promax 500, loosen the bolts securing the engine block to its housing located at the centre of the chassis. Onc…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos