Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to remove the dust cover disc, you will need to completely remove the rear wheel of the vehicle, loosening the central nut that secures it and also removing the brake caliper from the corresponding wheel disc. Once these components have been removed, you will be able to locate the dust cover disc at the back, which will need to be removed from its seat by loosening the three corresponding screws; once the old disc has been removed, you can insert the new one and then mount the corresponding wheel, ensuring that everything is functioning properly.

Posted on 1 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Engine Block of the LML Star 200
Guide to Removing the Engine Block of the LML Star 200
Star 200 In this brief and simple guide, you will find instructions to remove and open the engine block of the LML Star 200, as well as the Piaggio Vespa PX 2…
How do you replace the saddle of the LML Star 200?
How do you replace the saddle of the LML Star 200?
Star 200 In order to replace the seat of the LML Star 200, you need to loosen the screws that secure it to its housing: these screws will be located in the re…
How to Check the Stator Function on the LML Star 200
How to Check the Stator Function on the LML Star 200
Star 200 In this video tutorial, you will learn how to check the function of the stator, which sends electrical current, on the LML Star 200, as well as on th…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos