Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Engine Block of the LML Star 200

Model: Lml Star 200
Part: Engine

Video tutorial

In this brief and simple guide, you will find instructions to remove and open the engine block of the LML Star 200, as well as the Piaggio Vespa PX 200. First, remove the engine block from the frame. Then, take off the main components, including the intake manifold and the cylinder assembly, also removing the exhaust and brake drum as shown in the video.

At this point, remove the flywheel and stator by unscrewing all the screws from the engine block cover. Open the engine to access all transmission elements.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to remove the cylinder head of the LML Star 200 engine?
How to remove the cylinder head of the LML Star 200 engine?
Star 200 To remove the cylinder head of the LML Star 200 engine, first, pull the engine block out of its housing to gain more working space. Then, detach the …
How to replace the cylinder on an LML Star 200?
How to replace the cylinder on an LML Star 200?
Star 200 To remove the cylinder from an LML Star 200, first take out the engine block from its housing at the central rear of the frame. To do this, loosen th…
How to Replace the Timing Chain on the LML Star 200
How to Replace the Timing Chain on the LML Star 200
Star 200 To replace the timing chain on the LML Star 200, completely dismantle the engine block to extract it from its housing. Once the engine is removed, un…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos