Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on the LML Star 200

Model: Lml Star 200
Part:

Video tutorial

To replace the timing chain on the LML Star 200, completely dismantle the engine block to extract it from its housing. Once the engine is removed, unscrew the bolts securing the left-hand side cover to access the sprocket and other gears.

By loosening the nuts that hold the gears, you can slide the chain out of its housing and replace it with a new spare part. After the replacement, reassemble all the parts that were previously removed.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How do you replace the timing chain of the LML Star 200?
How do you replace the timing chain of the LML Star 200?
Star 200 To replace the timing chain tensioner of the LML Star 200, you need to loosen the screws that secure the component to its housing: this will be locat…
How to Replace the Timing Chain on the LML Star 200?
How to Replace the Timing Chain on the LML Star 200?
Star 200 To replace the timing chain on the LML Star 200, extract the engine from its housing by unscrewing the bolts that secure it to the supports. Once the…
How to Dismantle the Engine of the LML Star 200?
How to Dismantle the Engine of the LML Star 200?
Star 200 To dismantle the engine of the LML Star 200, you need to remove it from its housing by loosening the fixing screws of the supports and disconnecting …

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos