Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of the LML Star 200?

Model: Lml Star 200
Part: Engine

Video tutorial

To dismantle the engine of the LML Star 200, you need to remove it from its housing by loosening the fixing screws of the supports and disconnecting the various pipes and connectors. This way, the engine block will need to be extracted from its housing, and you will be able to unscrew the bolts on the top and side, separating the two half casings.

Doing this will allow access to the internal components of the engine and, if necessary, replace the required parts; after replacement, you can remount the half casings, securing everything with the appropriate bolts.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How do you disassemble the engine of the LML Star 200?
How do you disassemble the engine of the LML Star 200?
Star 200 In order to disassemble the engine of the LML Star 200, you will need to loosen the screws that fix it to its housing in the lower rear part of the f…
Guide to Removing the Engine Block of the LML Star 200
Guide to Removing the Engine Block of the LML Star 200
Star 200 In this brief and simple guide, you will find instructions to remove and open the engine block of the LML Star 200, as well as the Piaggio Vespa PX 2…
How to replace the cylinder on an LML Star 200?
How to replace the cylinder on an LML Star 200?
Star 200 To remove the cylinder from an LML Star 200, first take out the engine block from its housing at the central rear of the frame. To do this, loosen th…

How to Replace the Coolant in a Honda CB 500F

In this short and simple guide, you will find step-by-step instructions on how to drain and refill the coolant in a Honda CB 500F motorcycle. First, place your motorcycle on a stand and start by unscrewing the drain screw for the antifreeze, located on the water pump casing; let the fluid drain into a container for about ten minutes. Next, unscrew the radiator cap to allow the fluid to drain more quickly; finally, refill with new fluid suitable for your radiator, filling until you reach the maximum level mark!

Watch the video!


by ScegliAuto

More videos