Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Piston on an LML Star 125?

Model: Lml Star 125
Part: Engine

Video tutorial

You can replace the piston on an LML Star 125 by loosening the screws that secure the cylinder to the top of the engine block, after disconnecting all connectors and the respective manifolds. At this point, you can proceed to remove the cylinder from its housing to locate the piston inside: this must be disconnected from the connecting rod by removing the ring and the fastening pin. Then, position the new piston onto the connecting rod, securing it and then covering everything with the corresponding cylinder.


Posted on 5 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wheel of an LML Star 125
How to Remove the Front Wheel of an LML Star 125
Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…
How to Replace the Cylinder Head Assembly of the Lml Star 125
How to Replace the Cylinder Head Assembly of the Lml Star 125
Star 125 In this video tutorial, you will learn how to remove the cylinder head assembly, which includes the cylinder head, cylinder, and piston, of the Lml S…
How to Remove the Engine from the LML Star 125?
How to Remove the Engine from the LML Star 125?
Star 125 To remove the engine from the LML Star 125, loosen the screws that secure it to its housing, allowing you to disconnect all connectors and the intake…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos