Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Lml Star 125
Part: Clutch

In this brief guide, you will find instructions for removing and replacing the clutch cover on the LML Star 125. First, place the bike on its centre stand and begin by removing the rear wheel and brake plate, then remove the drum and shoes; this will allow access to the clutch cover by unscrewing all the side screws to remove it, as shown in the video. At this point, replace the gasket or thrust washer, reinstall the clutch cover; then reassemble the brakes and drum, and install the wheel!

Posted on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the clutch cable of the LML Star 125
How to replace the clutch cable of the LML Star 125
Star 125 In this short guide, we will see the instructions that will allow us to disassemble and replace the clutch cable of the LML Star 125, but also of the…
How to replace the clutch and gear cables on the Lml Star 125 - Piaggio Vespa PX 125
How to replace the clutch and gear cables on the Lml Star 125 - Piaggio Vespa PX 125
Star 125 Let's look at the instructions that will allow you to remove and replace the clutch cable and the gear cables on the Lml Star 125, as well as the Pia…
How to Remove the Front Wheel of an LML Star 125
How to Remove the Front Wheel of an LML Star 125
Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos