Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable on an LML Star 125

Model: Lml Star 125

Video tutorial

In this short guide, we will see the instructions that will allow you to remove and replace the clutch cable on an LML Star 125, as well as on a Piaggio Vespa PX 125. First, place the central stand and start unscrewing the bolt of the clutch lever, then disconnect the cable from it; next, you will need to disconnect the cable from the clutch cover lever by unscrewing the adjustment bolt found under the engine and pulling out the cable, as shown in the video.

At this point, install the new clutch cable, adjusting it via the adjuster.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to replace the clutch and gear cables on the Lml Star 125 - Piaggio Vespa PX 125
How to replace the clutch and gear cables on the Lml Star 125 - Piaggio Vespa PX 125
Star 125 Let's look at the instructions that will allow you to remove and replace the clutch cable and the gear cables on the Lml Star 125, as well as the Pia…
How to Replace the Clutch Cover on the LML Star 125
How to Replace the Clutch Cover on the LML Star 125
Star 125 In this brief guide, you will find instructions for removing and replacing the clutch cover on the LML Star 125. First, place the bike on its centre …
How to Remove the Engine Block from the Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Engine Block from the Piaggio Vespa PX 125 - Lml Star 125
Star 125 In today's tutorial, you will learn how to remove the engine block from the frame of the Lml Star 125, as well as the Piaggio Vespa PX. First, place …

How to Replace the Exhaust on the Sherco SEF-R 450?

To replace the exhaust on the Sherco SEF-R 450, loosen the screws securing the side panel of the mudguard on its right side. Once this panel is completely removed, you can locate the underlying exhaust, which must be freed from its housing by unscrewing the appropriate screws. After the support screws are removed, widen the ring connecting the exhaust to the exhaust manifold, and then you can completely remove it. This will allow you to insert the new exhaust and check its operation.

Watch the video!


by ScegliAuto

More videos