Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Drum Brakes on an LML Star 125

Model: Lml Star 125
Part: Brake drums and shoes

Video tutorial

Unscrew the bolts of the rear wheel, lift the scooter's rear with a jack or stand, and remove the wheel. Detach the clip from the outer disc, then unscrew the nut and remove the rear spacer washer.

At this point, you can remove the outer brake casing. Use tweezers to detach the small metal clip as shown in the video, then pry from the spring side on your right to release the drums from their housing.

Now, take the new drums and connect them together, then take the spring and the clip from the disassembled part and insert them into the new one. Reassemble everything in reverse order.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Shoes on the LML Star 125
How to Replace the Rear Brake Shoes on the LML Star 125
Star 125 In today's tutorial, you will learn how to remove and replace the rear drum brake shoes, as well as the front ones, on the LML Star 125, and also on …
How to Replace the Rear Brake Shoes on the Piaggio Vespa PX 125 - LML Star 125
How to Replace the Rear Brake Shoes on the Piaggio Vespa PX 125 - LML Star 125
Star 125 This guide provides the necessary instructions to remove and replace the rear brake shoes on the Piaggio Vespa PX 125 and the LML Star 125. First, pl…
How to Remove the Front Wheel of an LML Star 125
How to Remove the Front Wheel of an LML Star 125
Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos