|
Do it yourself
| |||
| ||||
Model: Lml Star 125
To replace the stator of the LML Star 125, loosen the bolts securing the cover at the rear of the motorcycle. Once the cover is removed, loosen the central nut of the variator and remove it, as the stator is located at the rear. At this point, you can remove the stator by loosening its front fixing screws. After removing the old stator, install a new replacement part. Once the new part is installed, reassemble all previously removed parts.
Updated on 26 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Star 125
Today's guide will show you the main steps on how to remove and replace the flywheel and stator on the LML Star 125. First, put the central stand dow…
Star 125
Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…
Star 125
Below are the steps necessary to remove and replace the exhaust on the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand and …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.093
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
