Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Flywheel and Stator on the LML Star 125

Model: Lml Star 125
Part:

Video tutorial

Today's guide will show you the main steps on how to remove and replace the flywheel and stator on the LML Star 125. First, put the central stand down and start by removing the engine cover and the flywheel cover by unscrewing the fixing screws; then unscrew the central nut of the flywheel, using a puller to remove it. At this point, unscrew the stator screws, disconnecting the electrical connectors to remove it from its seat; it is important to refit the stator in the same position, finally reassembling the flywheel and the flywheel cover!


Updated on 17 August 2026 by ScegliAuto


Related tutorials

How to Replace the Stator of an LML Star 125?
How to Replace the Stator of an LML Star 125?
Star 125 To replace the stator of the LML Star 125, loosen the bolts securing the cover at the rear of the motorcycle. Once the cover is removed, loosen the c…
How to Remove the Front Wheel of an LML Star 125
How to Remove the Front Wheel of an LML Star 125
Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…
How to Replace the Starter Motor on the LML Star 125
How to Replace the Starter Motor on the LML Star 125
Star 125 Today's guide will illustrate the main steps to dismantle and replace the starter motor on the LML Star 125, as well as the Piaggio Vespa PX 125. Fir…

How to Replace the Exhaust on the Sherco SEF-R 450?

To replace the exhaust on the Sherco SEF-R 450, loosen the screws securing the side panel of the mudguard on its right side. Once this panel is completely removed, you can locate the underlying exhaust, which must be freed from its housing by unscrewing the appropriate screws. After the support screws are removed, widen the ring connecting the exhaust to the exhaust manifold, and then you can completely remove it. This will allow you to insert the new exhaust and check its operation.

Watch the video!


by ScegliAuto

More videos