|
Do it yourself
| |||
| ||||
To replace the rear wheel shock absorbers on the LML Star, first remove the cover located over the rear wheel. Once removed, unscrew the two 17 mm bolts that secure the shock absorber, located at the top and bottom of the part. After loosening the nuts, the shock absorber can be removed and replaced with a new spare part. The new shock absorber should then be positioned and secured with the bolts removed earlier. Once the new part is installed, check that it functions correctly.
Updated on 26 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Star
To replace the front shock absorber on an LML Star, first remove the front wheel by unscrewing the bolts that secure it and also remove the brake cal…
Star
To replace the starter motor on an LML Star, remove the right side panel of the bike, located near the seat. Under this panel, you will find the star…
Star
To replace the brake button on the LML Star, unscrew it so that it can be removed from its housing located at the base of the brake lever. Once the b…
|
How to Replace the Fork Seal on a Malaguti XSM 125?
To replace the fork seal on a Malaguti XSM 125, loosen the bolts that secure the fork to its housing: these screws will be located at the top of the fork, just below the handlebars, and at the bottom near the wheel. Once all the bolts are loosened, you can free the wheel from its housing, allowing the fork to be detached as well: the seal at the top can be removed using a tool, so it can be replaced with a new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
