Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from the Body on an Lml Star 125

Model: Lml Star 125
Part: Engine

Video tutorial

In this video, follow all the steps to remove the engine from the body on an Lml Star 125. First, position the vehicle on a stand and lift the engine, possibly using a hydraulic jack; then, with two spanners, remove the rear suspension bolt as shown in the video.

At this point, remove the central engine fixing pin using a socket spanner, and begin lowering the engine; finally, disconnect all wiring related to the gearbox, clutch, and carburettor!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Remove the Engine Block from the Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Engine Block from the Piaggio Vespa PX 125 - Lml Star 125
Star 125 In today's tutorial, you will learn how to remove the engine block from the frame of the Lml Star 125, as well as the Piaggio Vespa PX. First, place …
How to Replace the Cylinder Head Assembly of the Lml Star 125
How to Replace the Cylinder Head Assembly of the Lml Star 125
Star 125 In this video tutorial, you will learn how to remove the cylinder head assembly, which includes the cylinder head, cylinder, and piston, of the Lml S…
How to Replace the Starter Motor on the LML Star 125
How to Replace the Starter Motor on the LML Star 125
Star 125 Today's guide will illustrate the main steps to dismantle and replace the starter motor on the LML Star 125, as well as the Piaggio Vespa PX 125. Fir…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos