Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Maxximo
    4. : Checks and maintenance

Mahindra Maxximo - Checks and maintenance

Mahindra Maxximo (2010-2015 / MK 1)
How to replace the front bearings of the Mahindra Maxximo
As the video shows, to replace the front bearings of your Mahindra Maxximo you will first have to remove the wheel by unscrewing the bolts and then jacking up …read all…
Posted on 20 September 2022 by ScegliAuto
Mahindra Maxximo (2010-2015 / MK 1)
How to renew the bodywork of your Mahindra Maxximo
As shown in the video, the Mahindra Maxximo van or microvan can wear over time, the paint can peel off and rust. To bring it back as new it will first be …read all…
Posted on 27 August 2022 by ScegliAuto
Shock absorbers (1) V-belt (1) Checks and maintenance (2) Diesel filter (1) Injectors (1) Gear oil (1) Engine oil (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos