Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Renew the Body of Your Mahindra Maxximo

Model: Mahindra Maxximo MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

Video tutorial

As shown in the video, the Mahindra Maxximo van or microvan can wear down over time, with paint peeling and rust forming. To restore it to like new condition, first detach the bed and clean the lower part where the wheels are located.

If there is rust, purchase products to remove it and prevent it from re-forming. Do the same for the square box: clean and apply rust prevention product.

Allow it to dry thoroughly and repaint both the part supporting the bed and the bed itself in your preferred color. At this point, reassemble the Mahindra van.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Shock Absorber on the Mahindra Maxximo?
How to Replace the Front Shock Absorber on the Mahindra Maxximo?
Mahindra Maxximo (2010-2015 / MK 1) To replace the front shock absorber on the Mahindra Maxximo, lift the vehicle so that the corresponding wheel is not in contact with the ground. Once…
How to Replace the Fuel Injectors on the Mahindra Maxximo
How to Replace the Fuel Injectors on the Mahindra Maxximo
Mahindra Maxximo (2010-2015 / MK 1) Follow these main steps to remove and replace the fuel injectors on the Mahindra Maxximo. First, open the hood of your vehicle and start disconnectin…
Replace the Serpentine Belt on the Mahindra Maxximo
Replace the Serpentine Belt on the Mahindra Maxximo
Mahindra Maxximo (2010-2015 / MK 1) Today, we will see in this video tutorial how to remove and replace the serpentine belt on the Mahindra Maxximo by following these simple and quick s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos