Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate Bluetooth in the Mahindra TUV300

Model: Mahindra Tuv300 MK 1 - Years 2015-2020
Part: Car stereo

In today's video, we will see how the radio works in the Mahindra TUV300. Specifically, how to activate Bluetooth and pair a device with the onboard system. Turn on the ignition and press the Tel button on the control panel. Turn on Bluetooth on your device, locate the radio, and enter the pairing code. This step is only necessary for the first pairing. Now you can also use the controls on the steering wheel to operate your device. Perform this operation for each new device. As you can see, it was a simple and quick operation.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in a Mahindra Tuv300?
How to Reset the Service Light in a Mahindra Tuv300?
Mahindra Tuv300 (2015-2020 / MK 1) The video here shows how to reset the service light, the one shaped like a wrench that appears on the display, in a Mahindra Tuv300, but the same pro…
How to Replace the Key Fob Shell of the Mahindra Tuv300?
How to Replace the Key Fob Shell of the Mahindra Tuv300?
Mahindra Tuv300 (2015-2020 / MK 1) To replace the key fob shell of the Mahindra Tuv300, remove the screw located at the top of the remote, just below the key. Once this screw is remove…
How to Replace the Headlight Bulbs on a Mahindra TUV300?
How to Replace the Headlight Bulbs on a Mahindra TUV300?
Mahindra Tuv300 (2015-2020 / MK 1) As seen in this tutorial, replacing the headlight bulbs on a Mahindra TUV300 is a very simple and quick task. First, ensure the key is not in the ign…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos